Filter bags materials selections for different industries
nachrichten

Filter bags materials selections for different industries

Ansichten : 3154
Updatezeit : 2018-08-14 14:57:51

Filter bags materials selections for different industries

 

As one professional filter bags manufacturer, INDRO filtration introduces you about filter bags materials selections solutions for following six industries: power industry, steel industry, cement industry, waste incineration, coking industry and biomass power industry.

Power industry filter bag material selection solutions

A: 500/550g pure PPS filter materials, suitable for conditions with low sulfur coal, the temperature is less than 160, and the oxygen content is low

B: 600g PPS/PTFE(layer: PPS, scrim: PTFE) filter materials, suitable for Medium sulfur coal, with a temperature of less than 165 (higher instantaneous temperature and higher oxygen content)

C: 650g PTFE compound filter materials (layer: PPS+PTFE, scrim: PTFE), suitable for high sulfur coal, corrosive and high oxygen content occasions, improve the use temperature and oxidation resistance, high cost performance.

D: 650g PTFE compound filter material02(layer: PTFE+P84, scrim: PTFE), suitable for flue gas dust collection field with high dust content, high oxygen content, low moisture content and strong gas corrosiveness.

E: 500/550g PTFE laminated pure PPS filter material: suitable for condition where the emission requirements are high precision, low sulfur coal, the temperature is less than 160 degrees, and the oxygen content is low.

F: 650g PTFE laminated PTFE compound filter material (layer: PPS+PTFE, scrim: PTFE), suitable for occasions which are with high discharge precision, high sulfur coal, corrosion and oxygen content occasions, improve the use of temperature and oxidation resistance, cost-effective.

 

Steel industry filter bags material selection solutions

A: 500/550g PTFE laminated acrylic felt

B: 600g NOMEX compound filter material (layer: NOMEX+P84, scrim: PTFE)

C: 650g PTFE compound filter material (layer: PTFE+P84, scrim: PTFE)

D: 850-900g fiberglass compound filter material (layer: P84+Fiberglass, scrim: fiberglass)

 

Cement industry filter bags material selection solutions

A: 500/550g NOMEX filter materials- It has good corrosion resistance and good abrasion resistance. It is suitable for large and medium-sized cement kiln heads.

B: 600g NOMEX compound filter material (layer: NOMEX+P84, scrim: PTFE) - Excellent corrosion resistance, good wear resistance, easy ash removal, high filtration accuracy, suitable for large cement kiln head, kiln tail.

C: 600g P84 filter materials (layer: P84, scrim: PTFE) - High temperature resistance, good corrosion resistance, good abrasion resistance, high filtration precision, suitable for large cement kiln tail.

D: 850-900g fiberglass compound filter material (layer: P84+Fiberglass, scrim: fiberglass)- High temperature resistance, good corrosion resistance and general wear resistance. It is suitable for filtering low and medium sized cement kilns.

 

Waste incineration industry filter bags materials selection solutions

A: 750g Pure PTFE laminated PTFE filter felt- suitable for occasions with high temperature resistance, oxidation resistance, excellent acid base corrosion resistance, high humidity and high filtration accuracy.

B: 750g Pure PTFE filter felt- suitable for occasions with high temperature resistance, oxidation resistance, acid base corrosion resistance, high humidity and low filtration accuracy.

 

Coking industry filter bags materials selection solutions

A: 750g Pure PTFE laminated PTFE filter felt- suitable for occasions with high temperature resistance, oxidation resistance, excellent acid base corrosion resistance, high humidity and high filtration accuracy.

B: 650g PTFE compound filter material (layer: PTFE+P84, scrim: PTFE) - suitable for the occasion of high temperature resistance, oxidation resistance, acid-base corrosion resistance, general hydrolysis resistance, high dust concentration and high filtration accuracy.

 

Biomass power plant industry filter bags materials selection solutions

A: 750g Pure PTFE laminated PTFE filter felt- suitable for occasions with high temperature resistance, oxidation resistance, excellent acid base corrosion resistance, high humidity and high filtration accuracy.

B: 650g PTFE compound filter material (layer: PTFE+PPS, scrim: PTFE)-suitable for occasions with high temperature resistance, excellent acid and alkali corrosion resistance, where sulphur and oxygen content in flue gas is usual.

Material/

Industry

Power Industry

Steel Industry

Cement Industry

Waste Incineration

Coking Industry

Biomass Power

100%PPS

Y

         

PPS/PTFE

Y

         

PPS+PTFE/PPS

Y

         

PTFE+P84/PTFE

Y

Y

   

Y

 

100%PPS W/PTFE MEM

Y

         

PPS+PTFE/PTFE   W/PTFE MEM

Y

         

100% Acrylic W/PTFE   MEM

 

Y

       

NOMEX+P84/PTFE

 

Y

Y

     

P84+FIBERGLASS

/FIBERGLASS

 

Y

Y

     

100%NOMEX

   

Y

     

P84/PTFE

   

Y

     

100%PTFE W/ PTFE   MEM

     

Y

Y

Y

100% PTFE

     

Y

   

PTFE+PPS/PTFE

         

Y